Raspi EDLC UPS: Unterschied zwischen den Versionen

Aus Hackerspace Ffm
Wechseln zu: Navigation, Suche
(Die Seite wurde neu angelegt: „== Motivation == For the [Rundbuntplasma] I wanted that the main power supply (a big 20A/5V supply) could be hard disconnected from mains and the Raspberry has st…“)
 
Zeile 3: Zeile 3:
  
 
== Circuit ==
 
== Circuit ==
 +
[[Datei:Raspi_USV.png|700px|UPS circuit for Raspberry using Supercapacitors]]

Version vom 19. März 2014, 00:21 Uhr

Motivation

For the [Rundbuntplasma] I wanted that the main power supply (a big 20A/5V supply) could be hard disconnected from mains and the Raspberry has still the possibility to shutdown nicely. The idea is to buffer the 5V for the Raspberry using two big Supercapacitors (EDLCs) with 50F each from Nesscap. The circuit was designed to be as simple as possible, the drawback is that the capacity is not used efficiently and has only enough time for a proper short shutdown (about 30 seconds). Another drawback is that the power supply comes up slowly at startup (takes about 10 seconds before Raspberry starts booting) and also powers the Raspberry for quite a long time after the shutdown so the system must be unplugged for about 10min before it will boot up again.

Circuit

UPS circuit for Raspberry using Supercapacitors