Änderungen
Aus Hackerspace Ffm
For serial communication with an Arduino I wanted a an Arduino IDE like serial monitor in the Raspberry Pi shell. Since I could not a find a terminal that did support “line mode” I found another workaround. It’s a quite simplistic approach.
== Explenation:==
<pre>stty -F /dev/ttyAMA0 cs8 115200 ignbrk -brkint -icrnl -imaxbel -opost -onlcr -isig -icanon -iexten -echo -echoe -echok -echoctl -echoke noflsh -ixon -crtscts</pre>
'''Source:'''[http://playground.arduino.cc/Interfacing/LinuxTTY]
This one i basicaly copy and pasted it, without understanding it. It gets the serial interface in the right mode to talk to an Arduino (with 115200 baud)
I use :
<pre>cat -A /dev/ttyAMA0</pre>
to listen to the serial port.
I use tmux split screen to be able to see both at the same time.
All of this is probably not a clean or nice solution, but it does what I wanted it to do.
