Mini Sustain Pedal for APC Key25

Aus Hackerspace Ffm
Version vom 24. Februar 2021, 22:15 Uhr von Tut (Diskussion | Beiträge) (Files for laser cutting)

(Unterschied) ← Nächstältere Version | Aktuelle Version (Unterschied) | Nächstjüngere Version → (Unterschied)
Wechseln zu: Navigation, Suche
SusPedAPC.jpg

This is a mini sustain pedal for my APC Key25 which has only an ugly positioned button. I installed a 3.5mm Jack into the APC and wired it parallel to the Sustain button. The pedal itself is laser cut, it uses two 1cm diameter springs and a button I found in somewhere in the electronic lab.

Files for laser cutting

Inkscape file for cutting from 4mm plywood