ESP32 with OLED: Unterschied zwischen den Versionen

Aus Hackerspace Ffm
Wechseln zu: Navigation, Suche
(Die Seite wurde neu angelegt: „= ESP32 modules with OLED display = There are several modules available that combine an ESP32 with an OLED display. Unfortunately they is often not much info a…“)
 
Zeile 1: Zeile 1:
 
= ESP32 modules with OLED display =
 
= ESP32 modules with OLED display =
 
There are several modules available that combine an ESP32 with an OLED display. Unfortunately they is often not much info about those, especially how to use them with Arduino.
 
There are several modules available that combine an ESP32 with an OLED display. Unfortunately they is often not much info about those, especially how to use them with Arduino.
 +
 +
Another module that features also a LoRa radio is the [[Heltec_Wifi_LoRa_32]].
  
 
== Wemos like module ==
 
== Wemos like module ==

Version vom 11. Februar 2018, 20:46 Uhr

ESP32 modules with OLED display

There are several modules available that combine an ESP32 with an OLED display. Unfortunately they is often not much info about those, especially how to use them with Arduino.

Another module that features also a LoRa radio is the Heltec_Wifi_LoRa_32.

Wemos like module

This is very likely a clone, as the original Wemos modules are not equipped with an OLED display.

Module with TTGO written on it, featuring 18650 battery holder

This is also a clone and very likely not from TTGO. It is equipped with an OLED display and a 18650 battery holder including some kind of charging circuit. The antenna placing of the module is not very wise - the Wifi performance is reduced somewhat compared to modules with a better placing.

Using the OLED

For both modules it seems that the OLED display is accessible by GPIO5 and GPIO4.