Änderungen
Aus Hackerspace Ffm
I started with the design from sparkfun: [https://www.sparkfun.com/products/9716 FTDI Basic Breakout] which I really liked, thanks for making the design open source, it saved me time.
== PINOUT ==
<pre>
+----------------------------+
| FTDI Board -> DTR |
| <- RX |
| U -> TX |
| S VCC |
| B <- CTS |
| GND |
+----------------------------+
</pre>
== Features ==
* Micro-USB-B connector (these are the cables I carry around anyways)
* 5V,5V switched, GND and FTDI connections in a 0.1 grid, so you can stack it onto a Universal PCB (stack a bigger DC/DC Converter for full 500mA for example)
The optional features of this FTDI are:
* Instead of PTC-Fuse: Current Limiting Power Switch 500mA (MIC2005A-1YM5 or similar)
* USB Bus Powered with Power Switching Configuration (see page 25 of the FT232R datasheet)
The optional features of this FTDI with the Adum5402 are:
== Stacking FTDI adapter with DC/DC converter (500mA) ==
Traco Power:
Licensing CC v3.0 Share-Alike (http://creativecommons.org/licenses/by-sa/3.0/)
[[Kategorie:Projekte]]
