Änderungen

SAMLAIR Airbrush Chamber

112 Byte hinzugefügt, 20:56, 30. Jul. 2018
It utilizes two 120mm PC FANs to create an airflow and suck paint particles away from you and into a filter.
Optionally it includes freely positoned ''lighting'', tool ''storage'' and a turn ''table'' for convenience.
 
[[Datei:Samlair panorama.jpg]]
The cost depends on how much spare materials you have and how many features you want but in general should be around 30€
1x 22litre IKEA Samla Box (39x28x28)
 
2x Plywood (4mm) A4
 
2x PC FAN 120mm (12V)
 
4x M4 Screw 40mm
 
8x M4 Hexnut + Washers
 
~250x150mm Steel Mesh (should be magnetic, check before you buy)
 
Strips of Filter Material (I used material from a vacuumer)
 
~8 Neodymium Magnets (strong enough to keep the filter material in place)
 
Optional (Turntable)
 
1x IKEA "Oleby"
 
1x 8mm Inner diameter ball bearing
 
4+ Felt Gliders
Optional (Light)
 
LED-Berg Light Dots
 
24V Power Supply (the one that comes with LED BERG is not Powerful enough)
 
Linear Regulator 24V->12V (so you can use the FANs and the light with the same power supply)
 
4x 30mm washer
 
4x Neodymium Magnet Disc (strong enought to hold a Washer through the box wall. I used 20mm diameter, 2mm thickness)
 
IKEA Trassla Cable Organizers
 
Optional (Storage)
 
1x Ikea Samla Lid (for 22l)
 
4x Ikea Samla Closing Latch
 
1x Ikea Samla Tool Insert
[[Datei:Samlair_Back.zip]]
 
[[Datei:SAMLAIR PivotPin.zip]]
'''Instructions''':
118
Bearbeitungen